I found this nice project, that can serve as a great tool in my workshop. The circuit was complicated and could not be made on perf board, well it could be but it’d …
TAG · ARDUINO
29 ENTRIES
Arduino
I made this for my nephew on his 10th birthday All the details of the project are here the controller is atmega8 running on inter 8Mhz with arduino boot loader.
Finally after days of tinkering finally got mega8 running on internal oscillator with arduino bootloader. I use arduino in most of my projects as it has amazing code base …
\# Fuse atmega8 high byte HFUSE: # 0xc9 = 1 1 0 0 1 0 0 1 <-- BOOTRST (boot reset vector at 0x0000) # ^ ^ ^ ^ ^ ^ ^------ BOOTSZ0 # | | | | | +-------- BOOTSZ1 # | | | …
On the quest to make my own oscilloscope and logic analyser using KST Planning to make a gui that will read the serial port and log the data to file that will be read by …
I always wanted to make a clock, I have many instrustables bookmarks I finally settled on one, the binary, built on arduino, and not special rtc, just good ol’ …
I first AVR programmer was a usb, I got in my 4sem of under grad, I knew nothing about uCs I knew what can be done using these, could not program on my own so I took the …
LYX: sudo apt-get install texlive-publishers sudo apt-get install texlive-science Miscellaneous chown chmod chgrp lsmod lsmod lspci lsusb grep dmesg dmesg | grep tty …
Still a work in progress, lots of tuning to do. The arduino sends midi data via serial, ttymidi makes virtual midi in/out ports and reads data from …